# RPi5 Runbook

*Raspberry Pi 5 - Edge Services*

**Endpoint ID:** 443395  
**Status:** 🟢 Online  
**Hardware:** ARM Cortex-A76, 16GB RAM, 512GB USB SSD  
**Access:** `rpi5-vish.local`

---

## Overview

Raspberry Pi 5 runs edge services including Immich backup and lightweight applications.

## Hardware Specs

| Component | Specification |
|----------|---------------|
| Model | Raspberry Pi 5 |
| CPU | ARM Cortex-A76 (4-core) |
| RAM | 16GB |
| Storage | 512GB USB-C SSD |
| Network | 1x 1GbE (Pi 4 adapter) |

## Services

### Primary Services

| Service | Port | Purpose |
|---------|------|---------|
| **Immich** | 2283 | Photo backup (edge) |
| Portainer Agent | 9001 | Container management |
| Node Exporter | 9100 | Metrics |

### Services (if enabled)

| Service | Port | Purpose |
|---------|------|---------|
| Plex | 32400 | Media server |
| WireGuard | 51820 | VPN |

## Secondary Pi Nodes

### Pi-5-Kevin
This is a secondary Raspberry Pi 5 node with identical specifications but not typically online.

- **CPU**: Broadcom BCM2712 (4-core, 2.4GHz)
- **RAM**: 8GB LPDDR4X
- **Storage**: 64GB microSD
- **Network**: Gigabit Ethernet + WiFi 6

---

## Daily Operations

### Check Service Health
```bash
# Via Portainer
open http://rpi5-vish.local:9001

# Via SSH
ssh pi@rpi5-vish.local
docker ps
```

### Immich Status
```bash
# Access UI
open http://rpi5-vish.local:2283

# Check sync status
docker logs immich-server | grep -i sync
```

---

## Common Issues

### Container Won't Start (ARM compatibility)
1. Verify image supports ARM64: `docker pull --platform linux/arm64 <image>`
2. Check container logs
3. Verify Raspberry Pi OS 64-bit

### Storage Slow
1. Check USB drive: `lsusb`
2. Verify SSD: `sudo hdparm -t /dev/sda`
3. Use fast USB port (USB-C)

### Network Issues
1. Check adapter compatibility
2. Verify driver loaded: `lsmod | grep smsc95xx`
3. Update firmware: `sudo rpi-eeprom-update`

---

## Storage

### Layout
```
/home/pi/
├── docker/           # Docker data
├── immich/          # Photo storage
└── backups/         # Local backups
```

### Performance Tips
- Use USB 3.0 SSD
- Usequality power supply (5V 5A)
- Enable USB max_current in config.txt

---

## Maintenance

### Weekly
- [ ] Check Docker disk usage
- [ ] Verify Immich backup
- [ ] Check container health

### Monthly
- [ ] Update Raspberry Pi OS
- [ ] Clean unused images
- [ ] Review resource usage

### Quarterly
- [ ] Test backup restoration
- [ ] Verify ARM image compatibility
- [ ] Check firmware updates

---

## Emergency Procedures

### SD Card/Storage Failure
1. Replace storage drive
2. Reinstall Raspberry Pi OS
3. Run deploy playbook:
   ```bash
   ansible-playbook ansible/homelab/playbooks/deploy_rpi5_vish.yml
   ```

### Overheating
1. Add heatsinks
2. Enable fan
3. Reduce CPU frequency: `sudo echo "arm_freq=1800" >> /boot/config.txt`

## Notes

This Raspberry Pi 5 system is the primary node that runs Immich and other services, with the secondary node **pi-5-kevin** intentionally kept offline for backup purposes when needed.

---

## Useful Commands

```bash
# SSH access
ssh pi@rpi5-vish.local

# Check temperature
vcgencmd measure_temp

# Check throttling
vcgencmd get_throttled

# Update firmware
sudo rpi-eeprom-update
sudo rpi-eeprom-update -a

# View Immich logs
docker logs -f immich-server
```

---

## Links

- [Immich](http://rpi5-vish.local:2283)
- [Portainer](http://rpi5-vish.local:9001)